Producer responsibility for batteries

Producer Responsibility Organisations
The information on this page is aimed at helping producer responsibility organisations for batteries, or those intending to apply for authorisation as a producer responsibility organisation, to understand what the role entails
Producer responsibility organisations help producers to collectively take producer responsibility. The role entails that certain tasks are to be carried out by the producer responsibility organisation on behalf of the producer. A producer responsibility organisation needs to be approved by the Swedish Environmental Protection Agency.
Target group
Producer responsibility organisations or those intending to apply to become a producer responsibility organisation.
Good to know
The Battery Regulation will gradually replace the Battery Directive. The parts of the regulation that deal with producer responsibility for batteries entered into force on 18 August 2025.
Legislation
EU Regulation (2023/1542) on batteries and waste batteries (europa.eu)
Regulation (2025:813) with supplementary provisions to the EU Regulation on batteries
Regulation amending Regulation (2008:834) on producer responsibility for batteries
Environmental Code (1998:808) (riksdagen.se)
News
Important changes in brief
From 18 August 2025, a new battery regulation will apply at EU level, which means, among other things, changed rules regarding producer responsibility and waste management.
Important changes (but not all changes) are:
- New definitions, including producer.
- New categories of batteries, including the categories of electric car batteries and batteries for light means of transport (electric scooters and electric bicycles).
- The role of producer responsibility organization is introduced, for the collective fulfillment of the obligations regarding extended producer responsibility. Producer responsibility organizations will have greater responsibility than the organizations that are currently responsible for collective collection systems.
- Both producer responsibility organizations and producers who do not appoint a producer responsibility organization, but choose to fulfill obligations regarding extended producer responsibility themselves, need to be approved by the Swedish Environmental Protection Agency.
- Only waste operators selected by the producer or producer responsibility organization may collect or treat battery waste.
- All operators who collect waste batteries must hand them over to the producer or producer responsibility organization, or a waste operator selected by the producer or producer responsibility organization.
- Specific provisions on the recycling of batteries.
- Waste management operators that recycle batteries will be responsible for achieving the recycling targets and reporting the recycling to the Swedish Environmental Protection Agency.
- Tougher requirements regarding the export of battery waste, especially if you want the treatment to count towards the recycling targets.
- New requirements for treatment and storage.
- Increased requirements for information for end users, waste management operators and recyclers.
- Requirements for distributors that are part of collection systems for waste batteries.
- Increased collection targets for portable batteries, new collection targets for batteries for light means of transport.
- Increased and new recycling targets, both for the entire battery and certain battery metals.
Batteries covered - three exceptions
Producer responsibility covers all batteries, regardless of design, chemistry or area of use, with very few exceptions. This means, for example, that batteries that are built into electrical equipment and vehicles are covered by producer responsibility.
A battery can be a battery cell, a battery module or a battery pack. Cells and modules are batteries if the intention is to use them directly as batteries without assembly into a module or pack.
Batteries not covered
The three exemptions from producer responsibility apply to batteries that are included in, or specifically designed to be included in:
- Equipment intended for military purposes.
- Equipment intended to be sent into space.
- Equipment specifically intended for the safety of nuclear facilities
Which battery category?
The EU Battery Regulation divides batteries into five categories. The categories of electric car batteries and batteries for light means of transports (electric bicycles and electric scooters) have been added. In addition, the definition of the categories has changed slightly compared to before. It is important to correctly determine which category of batteries you as a producer are providing on the market, since both producer responsibility and product requirements vary depending on the category.
Note, for example, that a battery weighing more than 5 kg cannot be a portable battery, but that a battery weighing less than 5 kg can be an industrial battery. And that an important criterion for whether it is an industrial battery rather than a portable battery is whether it is specifically designed for industrial use. Just because a battery is sometimes used by businesses does not mean that it is necessarily an industrial battery.
Also note that the category of starter batteries does not only include batteries in cars. More information about the categories can be found in recital 15 of the Battery Regulation (i.e. the introductory paragraphs before the articles themselves). The different types of batteries below are explained in the definitions section.
- Portable batteries
- Light means of transport batteries
- Industrial batteries
- Starter batteries
- Electric vehicle batteries
What does a producer responsibility organisation need to do?
A producer responsibility organisation must be authorised by the Swedish Environmental Protection Agency (EPA). The producer responsibility organisation has the following main tasks:
- Register its producers and itself with the Swedish EPA.
- Set up a collection system and collect waste batteries
- Ensure a non-discriminatory selection procedure for waste management operators who collect or treat waste batteries.
- Deliver collected waste batteries to approved treatment facilities.
- Report data to the Swedish EPA.
- Inform end-users about how waste can be prevented and where waste batteries can be returned for recycling
- Publish the total collection levels and recycling rates of the producers represented by the producer responsibility organisation.
- Every five years, pay for sample analyses of their producers' portable and light means of transport batteries. The competent authority shall ensure that the sample analyses are carried out.
Obligation to pay compositional survey fee
A compositional survey fee shall be paid by producers and producer responsibility organisations that are approved on 1 January of the year in which the compositional survey is carried out (i.e. every five years).
The compositional survey fee shall cover the total costs of administering and carrying out a compositional survey.
A producer responsibility organisation shall pay a share corresponding to the combined market share of the affiliated producers for portable and light means of transport batteries in the calendar year before the compositional survey was carried out, measured in weight.
How are the producer responsibility organisation's fees structured?
As a producer responsibility organisation, you need to ensure equal treatment of your producers, regardless of origin or size. The fees should also be adjusted to take into account any revenue from reuse or recycling.
Differentiated fees
In addition, producer responsibility organisations must adjust, or differentiate, the fees from producers as follows:
- As a minimum, by battery category and battery chemistry
- You should also take into account the environmental impact of a battery during its life cycle.
- If you consider it appropriate, by chargeability, the percentage of recycled content, whether the batteries have been subject to measures leading to recycling or the carbon footprint of the batteries
It is the responsibility of the producer responsibility organisation how the differentiation is made, but consideration of the points above will be included when reviewing the authorisation.
Apply for authorisation
A producer responsibility organization (PRO) needs to be approved to meet the requirements for extended producer responsibility (EPA) by 1 January 2026. A prerequisite for producers to be able to provide batteries on the Swedish market is that they either appoint an approved PRO or are themselves approved to meet the requirements for EPR (see more on the page for Producers).
The requirements for authorisation are largely the same regardless of whether it is a question of individual compliance (an individual producer) or collective compliance (PRO). However, there are certain differences, such as the requirements for a PRO to treat producers equally and differentiate fees. The requirements also differ slightly depending on the battery category.
Read the guidance on this page and prepare your application in good time.
Application and supervision fee
When the Swedish Environmental Protection Agency (EPA) has received your application, a notification with an application fee will be sent to you via email, please provide the correct email address for the recipient of this notification in the contact details.
The Swedish EPA will not start processing your application until the application fee has been paid. The application fee is SEK 225,000 for producer responsibility organizations (PRO) and SEK 110,000 for producers.
Please note that there is also an annual supervision fee of SEK 225,000 for approved PROs and SEK 110,000 for producers approved to meet the requirements of producer responsibility. The first year this annual fee must be paid is 2026.
How to apply for authorisation?
Before submitting an application for authorisation, please familiarize yourself with the Swedish Environmental Protection Agency's (EPA’s) guidance on producer responsibility for batteries and on authorisation, including information on application and supervision fees.
The Swedish EPA will review the applications. An application can be made from 18 August 2025 by downloading, completing and submitting the application form below to the Swedish EPA.
From the time a submitted application is deemed complete, the Swedish EPA has 12 weeks to make a decision. The authority may request supplements if the application is not considered complete.
Requirements to be met by producer responsibility organizations
Organizational means
Organizational means are that the producer responsibility organization (PRO) meets the requirements for collection systems in Article 59, 60 or 61 depending on which battery category its producers provide. Important parts of this are being able to describe:
- That a collection system has been designed with relevant stakeholders (of those listed in the articles) that enables the free collection of all spent batteries within the category(ies) of batteries for which authorisation is being applied for.
- In the case of industrial batteries, starter batteries and electric vehicle batteries, the system ensures that all batteries are collected that are provided by the producers appointed by the PRO and that it can also accept other stakeholders' waste batteries within its category.
- Whether the requirements for the collection system are met in cooperation with other producer responsibility organizations.
- Being able to collect waste batteries from all over the country and equip collection sites to safely handle and store waste batteries.
- That collected waste batteries can be delivered to treatment facilities that have a permit to carry out waste treatment and meet the requirements of the Battery Regulation (Articles 70 and 73 and Annex XII of the Battery Regulation where applicable)
- That the collection targets can be achieved (only for portable batteries and batteries for light means of transport).
See more under the collection section on this page.
The applicant needs to be able to prove how the requirements for the collection system are met with relevant documentation already in connection with the application, e.g. agreements with stakeholders who either collect waste or with whom you cooperate to set up collection points.
Financial means
Financial means are about you as a producer responsibility organization (PRO) having sufficient funds to cover the costs required to fulfill producer responsibility, especially the collection and treatment of your waste batteries.
In order for the financial means to be assessed, you may, for example, need to submit the latest annual report for the producer organization. In addition, a competent authority has the opportunity to analyze information in the credit report.
Internal control procedures
As a producer responsibility organization, you need to be able to describe how the requirement for internal control procedures is met, to ensure:
- That the data to be collected and reported to the competent authority is of high quality. As a producer responsibility organization, you need to report data to the competent authority annually in accordance with Article 75 of the EU Battery Regulation. You therefore need to describe how you check that this data is correct. If an external actor is used for collection, it is required that the data from this actor is checked in an appropriate manner.
- That the requirements of the EU Waste Shipment Regulation (2024/1157) are complied with (if all or part of the treatment of your collected waste batteries takes place abroad).
- That the fees to cover the costs of producer responsibility meet the requirements of Article 57(2) of the Battery Regulation and Section 21 of Regulation 2025:813. This is mainly about equal treatment of producers (regardless of origin or size) and that the fees are adjusted according to the requirements of Article 57(2) and Section 21 of Regulation 2025:813.
Information to stakeholders
You as a producer responsibility organisation need to describe how you intend to meet the information requirements. More details about the requirements can be found on the page “Informing end users about producers’ batteries”.
Financial guarantee
According to Article 58(7) of the EU Battery Regulation, you who apply to become an approved producer responsibility organisation (PRO) must provide a guarantee intended to cover the costs associated with waste management activities that the producer responsibility organisation will have to pay if the obligations regarding extended producer responsibility are not fulfilled, including if the activity ceases or in the event of insolvency. The material value from the recycling and the value of reused products can be counted towards the cost. This corresponds to the producers' cost responsibility in Article 56(4)(a) of the Battery Regulation.
The size of the guarantee should take into account the period of time it may need to cover, depending on, among other things, how long it can be expected to take for the PRO's producers to ensure that they meet the requirements regarding extended producer responsibility.
The financial guarantee must be adequate for its purpose. In order for the Swedish Environmental Protection Agency (EPA) to be able to assess whether this requirement is met, the type and size of the guarantee need to be determined. At the time of application, you need to be able to describe how the guarantee requirement is intended to be met. The guarantee must be valid when the activity begins.
The applicant needs to submit as complete a document as possible showing how the applicant intends to meet the guarantee requirement. This should include information on the type of guarantee the applicant intends to provide, a contract or draft contract and, where applicable, contact information for the relevant bank or insurance company.
The PRO applying for authorisation needs to submit a proposal for calculating the financial guarantee and supporting documents in its application. We recommend that you use the Excel forms available via the links in the text on how to calculate the financial guarantee.
The Swedish EPA will review whether the guarantee is adequate for its purpose or not in connection with the examination of the application.
The Swedish EPA may, on its own initiative, reconsider the size of the guarantee if there is reason to assume that the guarantee is no longer adequate for its purpose. The Swedish EPA shall also reconsider the size of the guarantee at the request of an approved producer responsibility organisation, if the request is reasonable.
Calculation of the size of the financial guarantee
According to the EU Battery Regulation, a financial guarantee must be able to cover the costs of disposal if the obligations regarding extended producer responsibility are not fulfilled, including if the business ceases or in the event of insolvency. The Swedish Environmental Protection Agency has developed the model below to calculate the size of the financial guarantee for producer responsibility organisations (PROs).
Producer responsibility organisations (PROs)
The size is calculated as an annual average of the forecasted net costs for the next three years. Due to the uncertainty factor regarding material prices, it is only considered possible to deduct 90% of the positive material value.
We recommend that you use the Excel form available via the link below. In the form, you fill in what the actual waste costs are expected to be per battery category for the specified years, and the size of the financial guarantee will be the annual average of the total net cost.
Authorisation may be withdrawn
The competent authority may withdraw the authorisation if any of the following occurs:
- the collection targets are not met (only portable batteries or batteries for light means of transports) or
- if the approved producer responsibility organisation does not:
- comply with the requirements for the collection and treatment of waste batteries or
- report information to the competent authority or
- notify changes to the conditions of the authorisation
- if the approved producer responsibility organisation has ceased operations.
Establishing collection systems for waste batteries
Collection systems are usually established by a producer responsibility organisation. A producer may choose not to appoint an approved producer responsibility organisation but must then meet the same requirements himself.
Batteries that are built into electrical equipment or vehicles can be collected by a collection system or reception system for electrical equipment or vehicles. Once the batteries have been removed, however, the requirements for collecting batteries apply and that they are handed over to a producer or producer responsibility organization.
What should be collected?
The producer responsibility organization must collect or take back waste batteries regardless of the nature, chemical composition, condition, brand or origin of the batteries, of the battery category that its producers provide in Sweden. This means that you must design a collection system to be able to collect all of your producers' waste batteries. In addition, you cannot refuse to accept other producers' waste batteries within your battery categories if these are provided to you. However, affiliated producers are only responsible for the costs of collecting the batteries they provide on the Swedish market.
Who should collect?
The producer responsibility organization (PRO) must take back waste batteries directly from end users or from take-back and collection systems.
For portable batteries and batteries for light means of transport, collection points must be established in cooperation with one or more of the following:
- Distributors
- Recyclers
- Actors who remove batteries from electrical equipment or vehicles
- Municipalities
- Voluntary collection points
For starter batteries, industrial batteries and electric car batteries, collection points must be established in cooperation with:
- Distributors
- Recyclers
- Actors who remove batteries from electrical equipment or vehicles
- Municipalities
As a PRO, you need to contact one or more of the actors above to establish collection points to the extent deemed necessary to be able to collect all batteries that the producers who are affiliated have provided in Sweden.
Please note that the collection of waste batteries may only take place at collection points that have been established together with a producer or PRO.
How should the collection be carried out?
The collection, covering the whole of Sweden, shall:
- Be designed to take into account population size and density, expected volume of batteries, accessibility and proximity to end users.
- Not be limited to areas where the collection and handling of waste batteries is profitable.
The producer responsibility organization shall:
- Equip the collection system in accordance with applicable safety requirements. This includes using appropriate containers that are adapted to the volume of waste batteries collected and any hazardous properties.
- Collect waste batteries as often as necessary, taking into account storage capacity and any hazardous properties.
- Ensure that the collected waste batteries are delivered to approved facilities for treatment.
Cost sharing
Producer responsibility organizations (PROs) shall cooperate with other PROs and producers approved to fulfil their obligations on the sharing of waste costs. That is, the cost of collecting and treating the waste batteries, and the revenue from the sale of recycled material from the category of batteries that has been collected.
The distribution shall be made so that it:
- corresponds to the producer's or affiliated producers' share of the market for new batteries of the category collected, measured by weight, or
- is in some other way in reasonable proportion to the producer's or affiliated producers' activities.
Register with the Swedish Environmental Protection Agency (EPA)
Producer responsibility organisations shall register themselves and their producers with the Swedish EPA. The registration shall be made before the producer provides batteries on the Swedish market and can be done via the Swedish EPA’s e-service or via API.
Information to be provided about the producer responsibility organization (PRO)
The application for registration shall include the following information:
- The name and contact details of the PRO including postal code, postal town, street address, country, telephone number, website and email address, corporate registration number and VAT number.
- Powers of attorney for the producers represented by the PRO.
Information to be provided about the producer (registration)
The application for registration must include the following information:
- The producer's name, any trademarks that the producer uses in Sweden, address and contact details.
- Personal or corporate identity number. If this is not available, the tax registration number is provided. A producer who is not established in Sweden, but sells directly to end users in Sweden, must instead provide the value added tax registration number (VAT number).
- The battery category(ies) that the producer intends to place on the Swedish market.
- A declaration that the information provided is truthful.
- Information on how the producer fulfils its obligations under Article 56 on extended producer responsibility and the collection requirements under Articles 59–61 depending on which battery category the producer provides.
Notify changes
It is the producer's responsibility to ensure that the information in the Swedish Environmental Protection Agency's (EPA’s) register is up-to-date and correct. The producer is therefore obliged to immediately notify the Swedish EPA of any changes to the information provided. The producer who is affiliated with a producer responsibility organization must make changes via the producer responsibility organization, which in turn makes changes to the Swedish EPA’s register. This is because it is important that the producer responsibility organization and the Swedish EPA have the same information.
Note that the producer register established at the Swedish EPA is not linked to other registers, such as the Swedish Companies Registration Office's Business Register. Any changes must therefore always be notified directly to the Swedish EPA.
Deregistration
If you believe that you are no longer a producer, you need to deregister with the Swedish Environmental Protection Agency (EPA). You may need to report and pay a supervision fee before deregistration can be carried out, depending on when your activities as a producer ceased.
If you are covered by producer responsibility in the future, you must register as a producer again.
If you have been active in the previous and current year, you need to report for both business years before you can deregister. Email information about deregistration to customer service:
kundtjanst@naturvardsverket.se
Companies that have not been active during the current year
If you have been operating in the previous year, you need to report for that year. Reporting is done via the e-service below.
Provide the following information to the Swedish EPA when deregistration:
- company name,
- organization number,
- reason for deregistration,
- date when the activity as a producer ceased,
- date when you made your report for the previous year and
- documentation that proves that you have reported.
Companies that have been active during the current year
If you have been operating in the current year, you need to submit a report for the current year. Reporting is done via the e-service below.
If you have been operating in the current year, a supervision fee needs to be paid. This is scheduled automatically and sent out continuously during the year
After the reporting has been done and the supervision fee has been paid, you need to submit a deregistration to the Swedish Environmental Protection Agency with the following information:
- company name,
- organization number,
- the reason why your company should be deregistered,
- date when the activity as a producer ceased,
- date when you made your report for the current year and
- documentation that proves that you have reported.
Report information to the Swedish Environmental Protection Agency (EPA)
The first deadline for reporting according to the EU Battery Regulation is not until 31 March 2027 for batteries made available in Sweden in 2026.
Reporting in 2026 for batteries made available in 2025 will be done as in the past, according to the Regulation (2008:834) on producer responsibility for batteries.
The producer is ultimately responsible for ensuring that the information reported is correct. Even if you have agreed with someone else to report on your behalf, you are still responsible for ensuring that this is done and that the information is correct.
Producers are responsible for reporting the amount of batteries that the producer has made available on the Swedish market during the previous year.
A producer is also responsible for reporting the amount of batteries that have been collected and treated, i.e. how the waste has been disposed of.
This is stated in the provisions of Section 21 of the Regulation (2008:834) on producer responsibility for batteries (see SFS 2025:814).
Report integrated batteries
When you report the amount of electrical equipment with integrated batteries sold, collected and treated, you state:
- the total weight of the product including the battery in the report for electrical equipment
- the weight of the battery in the battery report.
In other words, the amount of integrated batteries must be reported twice.
Reporting by recycling facilities
According to EU Regulation 493/2012, recycling facilities must report the recycling efficiency of the batteries they receive from producers within the EU. The report must be submitted to the Swedish Environmental Protection Agency (EPA) by 30 April for the previous year.
The reporting of the recycling rate from the facilities is in addition to the reporting that the producers do before 31 March.
Who should report?
For batteries recycled in Sweden: The recycling facilities must report the recycling rate to the competent authority (the Swedish EPA). This applies to the batteries that they received in 2022 for recycling.
For batteries that are fully or partially recycled outside Sweden: The actor who supplies the recycling facility abroad with batteries, i.e. the exporter, is obliged to report to the Swedish EPA.
What should be reported?
The recycling rate per battery type for batteries received at the facility in the previous year from one or more producers, and how that recycling rate has been calculated. However, the facility or exporter does not need to know whether a specific producer's batteries have actually undergone all steps in the recycling process. They must have been received by the facility and not be in intermediate storage.
The information requested is set out in ready-made templates in the annexes to Regulation 493/2012, see link below.
You do not need to report to the Swedish Environmental Protection Agency if no waste batteries have been sent to a recycling facility for the year to which the report applies.
Template for reporting and guidance from the EU Commission
For more information and to access the reporting templates, please see the EU Regulation and the guidance from the EU Commission.
How to report
Use the reporting templates and send them to kundtjanst@naturvardsverket.se
Purpose of reporting
The reports enable the Swedish Environmental Protection Agency to review compliance with producer responsibilities. The reports also form the basis for the statistics that are produced and forwarded to Eurostat and contribute to the national statistics published by Statistics Sweden. This informs the quantities placed on the market and to what extent we collect and recycle waste batteries in Sweden.
E-service for producer responsibility
Here companies can register as producers and report information to the Swedish Environmental Protection Agency. Here the company can also change invoice or contact details or obtain proof of registered producer responsibility.
Questions and answers
Why do we receive reminders to report even though we have already reported?
The most common reason is that the collection system has not received the report from us, but that you as a producer have already reported your data to the collection system. A common misconception is that this is in turn automatically submitted to us at the same time as you submit this information to your collection system. The majority of reports from the collection systems are received in March. This means that the reminder from us has already been sent to all producers in the register and thus these producers will also receive a reminder email when there is no report registered for them in our system.
It could also be that you are a producer of both electrical equipment and batteries and therefore they must be reported separately. This could mean that we have only received one of these and that you as a producer have received a reminder for the other. This is clear from the reminder email for which producer responsibility we have not received the report for.
We logged in to the e-service for the report but don't see the categories we should report under, what do we do?
This means that you need to update your registration, which can be done by clicking on “Batteries” on the home page or via “Producer Responsibility” and “Batteries”. On that page there is a button called “Change notification”. There you can add or remove battery types. You can only report under the battery types that are in the notification.
Please note that you must notify your collection system of any changes to the product categories you place on the market if you report via one.
How do I know what agreements we have with our collection system?
If you are unsure about what agreements you have with your collection system, e.g. whether it includes reporting and applies to both electrical equipment and batteries, please contact your collection system in the first instance. The collective collection systems are El-Kretsen, Recipo and Blybatteriretur.
Do I have to report even though we have not sold anything?
If you are a producer and are registered with us, you need to report even though you have not sold anything in the previous year. If you will continue not to sell anything for the current year or collect waste batteries, you can choose to deactivate your registration by contacting the Swedish Environmental Protection Agency's customer service. First, note the information about deregistration further up the page.
If your company has batteries that have been sold during the current year, you can report this in advance via the e-services for producer responsibility.
What is meant by reporting "treated quantity"?
Data for treated should correspond to how the waste has actually been treated, i.e. how much has been recycled, energy recovered, disposed of or similar. The data should be based on information from the treatment facilities, either directly or via a waste actor. This does not mean how much is sent to, for example, recycling, but how much is actually recycled until the waste is finally treated. If 100 tonnes of waste are collected and sent to a recycling facility with a material recycling rate of 50%, you should report 50 tonnes of material recycled and how the remaining 50 tonnes have been treated.
Please note. The amount collected should be reported in the year the waste was collected and treated in the year the waste was treated. This could mean that collected waste is reported in year X and treated waste is reported in year X+1.
All waste that has been treated outside Sweden should be reported as “Transported out of Sweden” and also how it has been treated.
Disposed of means landfill or incineration that does not generate any energy. If the waste has not undergone waste treatment, it should not be reported as treated.
Inform end-users about producers' batteries
As a producer responsibility organization (PRO), you must provide end-users and distributors with access to the following information on waste prevention and the management of waste batteries for the categories of batteries that your producers provide on the Swedish market:
- Information on how end-users can contribute to waste prevention. Including how the batteries can be used for as long as possible and how they can be recycled.
- Information on the role of end-users in the collection of used and waste batteries.
- Information on available collection points for used and spent batteries.
- Which facilities for recycling and preparation for recycling are available.
- Necessary safety instructions for handling waste batteries.
- Information on what labels and symbols on batteries mean.
- Information on how the substances contained in batteries affect the environment and human health and the safety of individuals.
- The importance of reducing litter.
How should the information be made available?
The producer responsibility organisations (PRO) are responsible for making the information available to the distributors. However, it is the distributors who are responsible for how the information is subsequently made available.
The information must be made available by the distributors:
- Regularly from the time the batteries are made available on the Swedish market.
- Permanently, easily accessible and visible at both points of sale and online platforms.
- In Swedish or English.
You as a PRO must carry out information campaigns or offer incentives to prevent waste and encourage the separate collection of waste batteries.
Information on websites
You as a producer responsibility organisation (PRO) must at least annually on your website, subject to business and corporate confidentiality, publish information on:
- The collection level for separate collection of waste batteries
- The material recycling rate and resource recovery rate achieved by the producers who have appointed the PRO.
- Who owns the PRO,
- Which producers have hired the PRO,
- How the compensation that a producer must pay to the PRO is calculated, stated in kronor per battery that the producer has provided on the Swedish market.
- On what grounds does the PRO choose to hire other stakeholders to handle waste batteries.
Definitions
Waste management actor
Any natural or legal person dealing on a professional basis with the separate collection or treatment of waste batteries.
Battery
Any device delivering electrical energy generated by direct conversion of chemical energy, having internal or external storage, and consisting of one or more non-rechargeable or rechargeable battery cells, modules or of packs of them, and includes a battery that has been subject to preparation for re-use, preparation for repurposing, repurposing or remanufacturing.
Light means of transport battery (LMT battery)
A battery that is sealed, weighs 25 kg or less and is specifically designed to provide electric power for the traction of wheeled vehicles that can be powered by an electric motor alone or by a combination of motor and human power, including type-approved vehicles of category L within the meaning of Regulation (EU) No 168/2013 of the European Parliament and of the Council ( 43 ), and that is not an electric vehicle battery.
Portable battery
A battery that is sealed, weighs 5 kg or less, is not designed specifically for industrial use and is neither an electric vehicle battery, an LMT battery, nor an SLI battery.
Electric vehicle battery
A battery that is specifically designed to provide electric power for traction in hybrid or electric vehicles of category L as provided for in Regulation (EU) No 168/2013, that weighs more than 25 kg, or a battery that is specifically designed to provide electric power for traction in hybrid or electric vehicles of categories M, N or O as provided for in Regulation (EU) 2018/858.
Industrial battery
A battery that is specifically designed for industrial uses, intended for industrial uses after having been subject to preparation for repurposing or repurposing, or any other battery that weighs more than 5 kg and that is neither an electric vehicle battery, an LMT battery, nor an SLI battery.
Starter battery (SLI battery)
A battery that is specifically designed to supply electric power for starting, lighting, or ignition and that can also be used for auxiliary or backup purposes in vehicles, other means of transport or machinery.
Producer
Any manufacturer, importer or distributor or other natural or legal person that, irrespective of the selling technique used, including by means of distance contracts, either:
- is established in a Member State and manufactures batteries under its own name or trademark, or has batteries designed or manufactured and supplies them for the first time under its own name or trademark, including those incorporated in appliances, light means of transport or other vehicles, within the territory of that Member State;
- is established in a Member State and resells within the territory of that Member State, under its own name or trademark, batteries, including those incorporated in appliances, light means of transport or other vehicles, manufactured by others, on which the name or trademark of those other manufacturers does not appear;
- is established in a Member State and supplies for the first time in that Member State on a professional basis, batteries, including those incorporated in appliances, light means of transport or other vehicles, from another Member State or from a third country; or
- sells batteries, including those incorporated in appliances, light means of transport or other vehicles, by means of distance contracts directly to end-users, whether or not they are private households, in a Member State, and is established in another Member State or in a third country.
Producer responsibility organization
A legal entity that financially or financially and operationally organises the fulfilment of extended producer responsibility obligations on behalf of several producers.
Producer representative
A natural or legal person established in a Member State in which the producer places batteries on the market and which is different from the Member State where the producer is established, and is appointed by the producer in accordance with Article 8a(5), third subparagraph, of Directive 2008/98/EC to fulfil the obligations of that producer under Chapter VIII of this Regulation.
Making available on the market
Any supply of a battery for distribution or use on the Union market in the course of a commercial activity, whether in return for payment or free of charge.
